Concrete Sealer
Use our concrete Sealer to penetrate deep into concrete without leaving lap marks or stains on the surface! Our concrete sealer is silicone based which allows it to last up to 10 years!
When using any concrete sealer to seal concrete, ensure that the surface is completly clean. If the surface is still dirty you will only be sealing in the dirt! When sealing concrete, take a little time to protect the yard plants and lawn around the concrete. To make this easy, we carry lightweight inexpensive paper-poly drop-cloths that will prevent sealer from landing on vegetation, cover up and be safe. NOTE: Never use sheet plastic over vegetation. On a sunny day, plants can fry within minutes.
Using a good brush with white china bristles or a deckster sprayer, apply the concrete sealer along the edge of the concrete nearest the house. Cover about 12” to 18” out from the house, being very careful to feather the edges so you can avoid missing anything. Cutting-in the edge like this allows you to begin spraying away from the house or building, minimizing your clean-up at the end of the job. Many contractors spray the entire concrete surface, avoiding the extra labor needed for cutting-in by using sheet plastic or a flexible painter’s shield to protect the house from spray.
A DECKSTER sprayer is the quickest method to apply cleaners and concrete sealers when used by a professional. On a windy day, the Hurricane Brush will be the fastest way to apply sealers without creating a clean-up headache. Our concrete sealer can also be applied with a pump-up sprayer, but that is more labor-intensive and a less-even application than you get when using a DECKSTER. You may also use a brush or roll it, but those methods are more labor-intensive and usually don’t get the sealer on evenly.